Leak Detection

DLP-1-DLP-2-img

DLP-1 & DLP-2
Designed to detect presence of liquid in sumps, attached access pipes, annular spaces, or locations requiring a small float-operated sensor. Two models to fit 1-1/2" and 2" standard piping.

DWP-25-img

DWP-25
Designed for use in the annular space of double wall fiberglass tanks to detect the presence of conductive liquid. When combined with Warrick® DMS or TA alarm panel, DWP-25 sensors can detect the presence of water or other conductive
liquids in normally dry annular spaces.

DFP-25-img

DFP-25
Designed for use in the annular space of double wall fiberglass tanks to detect hydrocarbon liquids. When hydrocarbons are present, a hydrocarbon wax pellet dissolves and closes a springloaded switch to signal a leak. This sensor is not reusable after exposure to hydrocarbons.

SVP-2-img

SVP-2
Designed to monitor hydrocarbon vapours in wells or sumps by absorbing the vapours and triggering a switch. Should not be used where vapours are continuously present. Fits in standard 2" pipe with cover.

DSP-2-img

DSP-2
Utilises conductivity probes and a reed switch based float switch to detect the presence of liquid and differentiate between hydrocarbons and water. When combined with Warrick® DMS or TA two-channel alarm panel, the DSP-2 can discriminate between water and hydrocarbon liquids causing fault condition.

Applications:

  • Above Ground Storage tanks
  • Underground Storage tanks
  • Sumps
  • Dry Annular spaces